KANEED For Toyota Car Automatic Headlamp Light Controller Sensor Switch Lights Control System Smart for Toyota Corolla Yat

KANEED For Toyota Car Automatic Headlamp Light Controller Sensor Switch Lights Control System Smart for Toyota Corolla Yat
  • Продавецflimmer.com
  • Список ценUS $44.88piece
  • Продажная ценаUS $44.88piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,9 (503)

Oписание продукта

 

 Pls know that APP language Only English .

aeProduct.getSubject()aeProduct.getSubject()

 

aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()

Scan QR code online download the App.

8218G_07

 

=System Features:
  •  TFT color display, humanized menu, voice prompt and easy to use.

  • 6 groups preset telephone number for alert calling; not lost number without power

  •  Up to 99 wireless zoneseach wireless zones can be defined as one of the 8 zone types, each zone can setup the siren independently.

  • Four sets of scheduled arm/disarmed function, each timed arm/disarm you can select the period of time and different defense zone

  •  Support ISD automatic voice mailbox for playback message upon alert. Maximum length of voice message is 10 seconds.

  • Remote control for arming, disarming, monitoring and speaking, setting up for relay and  siren.

  • Wireless intelligent study coding, compatible with PT2262 normal encoding and 1527 encoding, Maximum support 150 remote control and 150 sensors.

  • Integrated clock chip,time will not lose without power

  • Unique black box feature, display most recent 72 disarmed records and 102 recent alarm recording with accurate alarm time and zones.

  • Compatible with the international alarm networking protocol CONTACT ID

 

aeProduct.getSubject()aeProduct.getSubject()

Item Specification

1.Alarm keypad/Control Unit (GSM/PSTN alarm with Power Adapter)

 

aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()

 

At First,insert the power adapter output of electricity host power supply hole at this point, the host voice prompt welcome to use intelligent voice alarm, the backup battery switch to [ON]At first, Connect the telephone line to the perimeter phone interface of the host, and connect telephone to the inside phone interface. Secondly, connect the siren to the siren interface, and plug in adapter. At last, the host will voice prompt “welcome to use alarm system”, then it\'s done after switch the power switch to “ON”.

 

1, Dial Mode: GSM/PSTN

2, GSM frequency:  850/900/1800/1900Mhz
3, Input Voltage: DC12V/1A
4, Standby Current: <55mA
5, Alarming Current: <450mA 
6, Backup battery:  NI-HI AAA*6 DC7.2V
7, Alarm loudness: 110dB
8, Wireless frequency is 433mhz

9,  4 Kinds of Power Plug: US/Euro/UK/AU Plug, We will send out the right one that match with your country   .

 

 

2. PIR Motion Infrared Detector( Battery not Included )

 

 

Installation height is about 2.2 meters above ground and the optimized detection angle for most motion sensor is 90 degree. The sensor should face the detected area with this consideration for best coverage. It is advised to install with the face of motion sensor perpendicular to the most probable moving detection of people for the highest effective detection.Before use, make sure the power switch of PIR motion sensors is at the ON position.

 

1, Frequency: 433Mhz

2, Built-in antenna
3, Detection distance: 10-12 meters
4, Detection range: 110 degree 
5, Operating power: 9V 

aeProduct.getSubject()

 

3.Door / Windor Sensor( Battery not Included)

 

 

Use the random equipped double-side tape to stick a magnetic stripe on the door and affix the gate magnetic emission box on the doorframe. Pay attention to put the magnetic strip close to the side with indicator lights of the emission box during installation, assuring proper alignment and the smaller distance the better.

1, Transmission frequency: 433MHz
2, Operating Power: 23A 12V
3, Built-in Antenna

4, It will send the alarm signal to control host once the door or window is opened 

aeProduct.getSubject()

 

4.Remote Control ( Battery Included)

 

 

When an emergency occurs, press emergency button on the remote control or on panel to activate alarm.

 

1, Power: 12V battery x 1 pcs(battery included)
2, Static Current: I1 = 0
3, Transmission Current: I2 no more than 15mA
4, Transmission Time: no less than 1s
5, Transmission Distance: 80m (No Obstacle)
6, Operational temperature:-10 to 40 (approx 14F - 104F)
7, Humidity: no more than 90
 

aeProduct.getSubject()

5.Wired Siren

 

 

 

1, 110dB/m

2, Wired connect to Host

3, Operation Temp: -10C~50C;Humidity:no more than 90%

aeProduct.getSubject()

 

Package Including: 

1 x Keypad/Control Unit (without original box,need extra $3.5 if you want it)

10 x Door/Window Sensor

5 x Motion Detector

4 x Remote Control

1 x Wired Siren

1 x Power Adapter

1 x English Manual

 

Please be sure that your address is not a remote area,or you need to pay $30 more for extra fee.

 

 

NOTE:4 Language Verison: EnglishRussianSpanish and French Voice.  Please leave a note of which voice you need, or we will send English as default.

 Not support language switching,and just available for english user manul book.

 

Please use 2G SIM card or if your SIM card can work with 2g signal

 

aeProduct.getSubject()

 

 

 

Function:

1.Install the PIR sensor on the wall and the door sensor on the window or house door.Someone who intruder your house illegally,the PIR sensor and door sensor will be triggered and send the signal to the alarm panel,then the  wired loud siren will sound and send SMS to the preset number/auto dial the mobile.

 
 

2.Extension function:This system can work with most of wireless alarm accessories in our store like smoke detector, gas detector,water leak detecto,pet-immunity sensor,IR beams etc.

aeProduct.getSubject()