AT3817A TFT LCD Display Precision Digital LCR Meter With 10Hz 100kHz Frequency

AT3817A TFT LCD Display Precision Digital LCR Meter With 10Hz 100kHz Frequency
  • Продавецflimmer.com
  • Список ценUS $767.70piece
  • Продажная ценаUS $767.70piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,4 (788)

Oписание продукта

1.8

AT3817A TFT-LCD Display Precision Digital LCR Meter With 10Hz-100kHz Frequency 

feature

The newly upgraded AT3817A adopt true color TFT-LCD display and full Chinese operation interface (configurable into English). Displayed in large fonts, readings are more intuitive, used for laboratory quality control, feed inspection and component sorting. AT3817A with continuous frequency point of 10Hz~100kHz with a resolution of 0.001Hz. Test signal level 0.01Vrms ~ 2.00Vrms (10mV step), (add DCR measurement and internal DC bias (DC BIAS, ±2.5V) compared to AT28 series)
AT3817A can test the 4 parameters of the component at the same time. Each parameter can be arbitrarily configured. The newly improved instrument realizes full 6-bit display of the main and auxiliary four parameters. It can scan 10 kinds of frequencies or level lists, it can also be used for 3 groups users frequency be corrected to improve accuracy. Built-in comparator, through HANDLER interface combined with PLC to complete automatic sorting of components.

Feature
True color 16M color, TFT-LCD display.
Store 999 LCD screen files, trigger delay, automatic level control (ALC)
Correction function: full-scale open circuit and short-circuit sweep frequency clear, three groups of users point frequency calibration.
Multi-frequency test: support 10 frequency scan tests
Multi-level test: support 10 level scan tests
10 sets of file management for full storage of instrument status, list scan settings and comparator settings.
Enhanced comparator (sorting) function: Programmable P1~P9 Nine-segment sorting, main parameters HI, IN, LO display and output, NG, AUX, SREJ, IDX, EOM, etc. Output.
Absolute deviation (ABS) comparison mode, relative deviation (PER) and order (SEQ) comparison.
Switchable accessory file (AUX) sorting.
Programmable from 1 to 200 times to provide stability.
Custom sorting results are heard.
Built-in RS232C interface and Handler interface.
1000V super shock protection
 
specification
 

Specification:

ParametersCs-Rs,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,G-B,R-X,Z-θrad,Z-θdeg DCR
Monitor ParametersZ, D, Q, θr, θd, R, X, G, B, Y, Vac, Iac, Δ, Δ%
Accuracy0.05%±5 digit
Frequency10Hz-100kHz(continuous frequency with resolution of 0.001Hz)
Display RangeL: 0.00001μH-999999H C: 0.00001pF - 999999μF R,Z: 0.00001Ω - 99.9999MΩ D:0.00001–9.99999 Q: 0.00001 – 99999.9 Δ%:-999999% - 999999% θ(deg): -179.999o - 179.999oθ(rad) :-3.14159 – 3.14159 DCR: 0.00001Ω ~ 99.9999MΩ
Source Resistance30Ω, 50Ω, 100Ω
Range9 ranges, Automatic, Manual, Nominal
Display Max6 dgt, principle parameter: 999999; sub parameter: 999999; monitor parameter: 999999
Signal Level0.01V - 2.00V (10mV Step)
Speed30 t/s, 10 t/s, 6 t/s, 3 t/s 1 - 256 times average is available
Comparator14-bin sorting, 10-bin GD, 1-bin NG, 1-bin AUX, 2-bin principle parameter NG Count function: Max - 999999
List Test10 groups frequency and level scanning test
AdjustmentOpen/Short frequency correction, 3 point frequency and load correction
Files10 group files to save users\' setting, 1 group to save system data real-time
InterfaceRS232C, ExHandler Interface, with standard USB disk interface (article 10000 data)
  LCR automatic selection, true color TFT-LCD display Store 999 LCD screens, trigger delay, automatic level control
  Voltage: 90V AC - 250V AC Frequency: 50Hz - 60Hz Power: Max 20VA
  264mm(Width)x107mm(Height)x350 mm(Depth); 4kg
  ATL501E: Kelvin Test clip ATL601: Test fixture ATL600: Short-circuit slice ATL108: RS232 Communication cable
  ATL608 SMD patch test fixture ATL508: SMD patch test clip ATL508A: SMD patch test clip ATS2817: Data acquisition software

 

 

 
picture
 
 
1
 
information