1set Mi light WiFi Led controller iBox + 4pcs 2.4G DC12 24V led Controller RGBW + 4 Zone RF remote control for Led Strip Light

1set Mi light WiFi Led controller iBox + 4pcs 2.4G DC12 24V led Controller RGBW + 4 Zone RF remote control for Led Strip Light
  • Продавецflimmer.com
  • Список ценUS $62.00piece
  • Продажная ценаUS $62.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,4 (138)

Oписание продукта


           Welcome to use our DMX512 contoller.It is the upgraded version of the BC-100 DMX512 controller, it outputs international standard DMX512/1992 signal, it not only can control all the LED lights in the market as long as it receives standard DMX signal, but also can work with DMX Decoder to control general led ligths which do not accept DMX512 signal. this DMX512 Controller has a LCD screen, easy to operate with RF wireless remote control. Built-in real time clock system and a strong DIY & combination function can achieve abundant light color effect, and can meet your various control requirements.

Featue function:
1、With LCD screen, easy to operate.
2、Built-in real time clock system, your program can be set to played in any time.
3、40 built-in patterns, 4 DIY recording modes and 4 combined modes, it can combine hundreds of control patterns.
4、Multilevel changing speed, brightness and RGB sequence adjustment for yout choices .
5、Output standard DMX512/1990 signal, can control 170 Pixels.
6、Support multiple DMX512 connector like XLR-3, RJ45, terminals, easy to use.
7、With RF wireless remote control, can choose changing modes and control speed and brightness.

Product parameter:

BC-100DMX512 Controller
Working Voltage: DC9V (With adapter)
Output Signal: DMX512
DMX Interface:  XLR-3,RJ45,Terminal Block
Working Temp: -20-55℃
Dimension: 161MM*100MM*30MM
Weight(G.W.): 460G

Note:Remote Battery is not include

Safety warnings

Please don’t install this controller in lightening, intense magnetic and high-voltage fields.

1. To reduce the risk of component damage and fire caused by short circuit, make sure correct connection
2. Always be sure to mount this unit in an area that will allow proper ventilation to ensure a fitting temperature.
3. Check if the voltage and power adapter suit the controller
  (please select DC12-24V power supply with constant voltage)  
4. Don’t connect cables with power on; make sure a correct connection and no short circuit checked with instrument before power on.
5. Please don’t open controller cover and operate if problems occur.

The manual is only suitable for this model; any update is subject to change without prior notice.