2kg graphite crucible for 2kg Melting Furnace Melting crucibles melting curicible used for mini melting furnace

2kg graphite crucible for 2kg Melting Furnace Melting crucibles melting curicible used for mini melting furnace
  • Продавецflimmer.com
  • Список ценUS $23.50piece
  • Продажная ценаUS $23.50piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,8 (238)

Oписание продукта

aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()voltage 110/ 220/240v

frequency 50/60hz

capacity 1kg 2kg

weight 9kg

packing size 22*22*40cm

Maximum temperature 220V= 2000 F (1100 C) 110V=1030 C

accessories one tong, one crucible,and one power cord cable

melted metal Aluminum, Copper, Gold, Lead, Silver, Sterling Silver, Tin & Zinc

molten gold machine instructions

1.will melt gold machine put smoothly

2.and carefully examine whether products,then will cover intact,dissolve gold open check whether the vessel intact

3.connecting swith power supplu,electrictity,light switch

4.and the normal work,intelligent temperature controller with the digital furnace temperature and slowly rising,if there are any complicatios,be sure to stop using it

5.in the process of operation,the furnace temperaturedegrees will spread,staff shall not move and collision,avoid scald and damage

6. in june,when the temperature reached gold and gold rains melring point,staff according to demand will continue to increase.when the maximum temperature reached 1,100 degrees in 28C,will stop work or in cooling condition

7 gold,be sure to disconnect the power supply,then use to operate,go profssional pliers to ensure their safety

8 and shall immediately take gold after moving machines,owing to the high temperature,can easily damaged internal components,and burns itself to its cooling,10-20 minutes,to ensure the service life of the products

9 every time interval must be in 30-60 minutes,very easy to damage the product

10 for precision machine,plz dont remove the professional technology,to ensure accuracy

11 plz pay attention to safety and maintain normal use of machine