T 890 Infrared BGA Rework Station IRDA Soldering Welder

T 890 Infrared BGA Rework Station IRDA Soldering Welder
  • Продавецflimmer.com
  • Список ценUS $580.00piece
  • Продажная ценаUS $580.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,5 (431)

Oписание продукта

 

 

 

Infrared IR Reflow Oven IC Heater BGA Rework Station PUHUI T862

 

F

 

Working voltage : AC220/110v 50/60Hz

Output power:800W

Temperature: 100-350 degree

 

Characters:

Can suitable for all of the component,especially Micro BGA component.

1. Adopt infrared weld technology which independent exploration.

2. Use infrared heat,it is easy to cut through,heat proportion piercing tradition weld machine with sirocco.

3. Easily operate.Just need one day training.Can operation this machine.

4. No need weld tools,it can weld all the component of 15x15-35x35mm.

5. This machine has 650W heating system.widely to 120x120mm.

6. Infrared heating no have sirocco flow. Don\\\'t impact perimeter scomponent. Can suitable for all of the component,especially Micro BGA component.

 

Operation method

(1). Locate, choose and attach the appropriate lens:

The usable of the lenses diameter are 28mm, 38mm, 48mm.(only 1 lens included)

(2)When the area of the chips is below 15mm*15mm, please choose the IR-lamp temperature about 160-240, and choose the lens which D=28mm to avoid destroying other places, usually it will take you about 20-40seconds.

(3)When the area of the chips is between 15mm*15mm and 30mm*30mm, please choose the IR-lamp temperature about 240-320, and choose the lens which D=38mm to avoid destroying other places, usually it will take you about 30-60seconds.

(4)When the area of the chips is above 30mm*30mm, please choose the IR-lamp temperature 350(Attention: you should turn on the pre-heat dish first, and set-up the temperature about 150-200,wait 3-5minutes to allow the temperature steady on the set-up temperature),and choose the lens which D=48mmto avoid destroying other places, and keep the lamp body direct light. You should control the time carefully to avoid burning the chips.

 

P

 

 

54312

 

 

 

678

 

 

 

HTB1I07Uc2BNTKJjy0Fdq6APpVXacHTB1sQHohtqUQKJjSZFIq6AOkFXaxHTB1vzA4hMMPMeJjy1Xcq6xpppXaUHTB1LV2fdGmgSKJjSsplq6yICpXa8